Waspaloy, Waspaloy pula e thatafatsa deformation superalloy
Waspaloy, Waspaloy pula e thatafatsa deformation superalloy,
Letlapa la Waspaloy, Lesale la Waspaloy, Molamu oa Waspaloy,
Mabitso a Tloaelehileng a Khoebo: Waspaloy, GH4738, UNS N07001,W.Nr.2.4654.
Waspaloy ke superalloy e thata ea nickel e nang le matla a matla a mocheso o phahameng le khanyetso e ntle ea kutu, haholo-holo ho oxidation, mochesong oa ts'ebeletso ho fihla ho 1200 ° F (650 ° C) bakeng sa lits'ebetso tse potolohang tsa bohlokoa, le ho fihla ho 1600 ° F (870 ° C. ) bakeng sa lits'ebetso tse ling, tse sa batleng haholo.Matla a mocheso o phahameng a alloy a tsoa ho likarolo tsa eona tse tiileng tse matlafatsang tharollo, molybdenum, cobalt le chromium, le likarolo tsa eona tse thatafatsang lilemo, aluminium le titanium.Matla a eona le maemo a botsitso a phahame ho feta a fumanehang bakeng sa alloy 718.
Sebopeho sa Waspaloy Chemical
| C | S | P | Si | Mn | Ti | Ni | Co | Cr | Fe | Zr | Cu | B | Al | Mo |
| 0.02 0.10 | ≤ 0.015 | ≤ 0.015 | ≤ 0.15 | ≤ 0.10 | 2.75 3.25 | Bal | 12.0 15.0 | 18.0 21.0 | ≤ 2.0 | 0.02 0.08 | ≤ 0.10 | 0.003 0.01 | 1.2 1.6 | 3.5 5.0 |
Waspaloy Physical Properties
| Boima ba 'mele (g/cm3 ） | 0.296 | |||||
| Sebaka se qhibilihang (℃) | 2425-2475 | |||||
| Emperature (℃) | 204 | 537 | 648 | 760 | 871 | 982 |
| Coefficient ea ho eketsa mocheso | 7.0 | 7.8 | 8.1 | 8.4 | 8.9 | 9.7 |
| Thermal conductivity | 7.3 | 10.4 | 11.6 | 12.7 | 13.9 | - |
| Elastic modulus (MPax 10E3) | 206 | 186 | 179 | 165 | 158 | 144 |
Waspaloy Alloy Tloaelehileng Mechanical Properties
| Boemo | Matla a ho tsieleha/MPa | Mocheso oa ho sebetsa |
| Tharollo annealing | 800-1000 | 550ºC |
| Tharollo + botsofali | 1300-1500 | |
| Annealing | 1300-1600 | |
| Selemo se futhumetseng | 1300-1500 |
¤(Ts'ebetso e tloaelehileng ea mocheso o phahameng o tšoarellang, tlhahlobo bakeng sa lakane ea kalafo ea mocheso)
Maemo a Waspaloy le Litlhaloso
| Bara/Molamu /Mohala/Mohala | Hlobola/Koala | Leqephe/Letlapa | |
| ASTM B 637, ISO 9723, ISO 9724, SAE AMS 5704, SAE AMS 5706, SAE AMS 5707, SAE AMS 5708, SAE AMS 5709, SAE AMS 5828, | SAE AMS 5544 | ||
Lihlahisoa tsa Waspaloy tse fumanehang ka Metals ea Sekonic
Waspaloy Bars & Rods
Li-bars tse chitja/Flat bars/Hex bars, Size From 8.0mm-320mm, E sebelisetsoa liboutu, li-fastners le likarolo tse ling
Waspaloy Wire
Fana ka terata ea welding le terata ea selemo ka mokhoa oa khoele le bolelele bo sehiloeng.
Letlapa la Waspaloy & poleiti
Bophara ho fihla ho 1500mm le bolelele ho fihla ho 6000mm, Botenya ho tloha 0.1mm ho isa 100mm.
Li-Fasteners tsa Waspaloy
Lisebelisoa tsa Waspaloy ka mefuta ea Bolts, screws, flanges le tse ling tse lebelo, ho latela litlhaloso tsa bareki.
Waspaloy strip & coil
Boemo bo bonolo le boemo bo thata bo nang le bokaholimo bo khanyang ba AB, bophara ho fihla ho 1000mm
Ke hobane'ng ha Waspaloy?
Ho thatafatsa lilemo tse khethehileng tsa nickel-based alloy, matla a phahameng a sebetsang ho 1400-1600 ° F. Ho hanyetsa hantle ho oxidation e sebelisoang moenjineng oa turbine ea khase ho 1400-1600 ° F sepakapaka.Ka 1150-1150 ° F, matla a ho phatloha ha Waspaloy a phahame ho feta ka 718.
Ka tekanyo ea 0-1350 ° F, matla a chesang a chesang ka nako e khutšoanyane a mpe ho feta 718 alloy.
Sebaka sa kopo ea Waspaloy:
Waspaloy e sebelisetsoa likarolo tsa enjene ea turbine ea khase e hlokang matla a mangata le ho hanyetsa kutu ha mocheso o phahameng oa ts'ebetso. Lisebelisoa tsa hajoale le tse ka bang teng li kenyelletsa li-compressor le rotor discs, shafts, spacers, litiiso, mehele le li-casing, li-fasteners le lisebelisoa tse ling tse fapaneng tsa enjine, likopano tsa airframe. le litsamaiso tsa limisaele.
Waspaloy ke precipitation-hardened deformed superalloy, mocheso o sebetsang ha o fete 815 ℃. Alloy e na le matla a ho hlahisa lihlahisoa tse phahameng le ho hanyetsa mokhathala ho 760 ℃ ~ 870 ℃, le ho hanyetsa ha ho bola ho matla ho 870 ℃, e loketseng ho etsa li-discs tsa WO. , li-blades tse sebetsang, li-fasteners tse phahameng tsa mocheso, li-cylinders tsa lelakabe, li-shafts le linyeoe tsa WO turbine. Lihlahisoa tse ka sehloohong ke lesela le pholileng le batang le lesela le chesang le chesang, pipe, strip, terata, forgings le bolt fasteners, joalo-joalo.
Letšoao le lumellanang: W.nr 2.4654, UNS N07001, AWS 170
Tekanyetso e sebetsang: AMS 5544 AMS 5708 AMS 5828
