Inconel 725, Alloy 725, Nickel 725,UNS N07725

Lintlha tsa Sehlahisoa

Inconel 725, Alloy 725, Nickel 725,UNS N07725,
Inconel 725 bar & Rods ;Inconel 725 lakane & poleiti;Inconel 725 tube e se nang seam & pipe e cheselitsoeng,

Mabitso a Tloaelehileng a Khoebo: Inconel 725, Alloy 725, Nickel 725,UNS N07725

Alloy 725 ke motsoako o thata oa lipula, oa nickel-base alloy o fanang ka khanyetso e ikhethang khatellong ea khatello ea maikutlo le ho putlama ka kakaretso le mapheo a matle nakong ea boemo bo thata.Ka khanyetso ea kutu e ts'oanang le 625 mme e phahametse ea 718, 725 e nkuoa bakeng sa lits'ebetso moo ho amehang tikoloho e senyang haholo.Matla a lihlahisoa (0.2% offset) ka holimo ho 120 ksi (827 MPa) e ka fumanoa ka botsofali ntle le ho sebetsa ka mofuthu kapa ho bata pele.Bokhoni ba ho thatafatsa pula bo bohlokoa haholo lits'ebetsong moo boholo ba karolo e kholo kapa sebopeho se rarahaneng se thibelang ho sebetsa ka mofuthu.Inconel 725 Sebopeho sa Lik'hemik'hale

Alloy

%

Ni

Cr

Fe

Mo

P

Nb

C

Mn

Si

S

Al

Ti

725

Min.

55.0

19.0

tekatekano

7.0

- 2.75 - - - - - 1.0

Max.

59.0

22.5

9.5

0.015 4.0 0.03 0.35 0.2 0.01 0.35

1.7

Inconel 725 Thepa ea 'Mele

Botenya 8.3 g/cm³
Sebaka se qhibilihang 1271-1343 ℃

Inconel 725 Thepa e Tloaelehileng ea Mechini

Boemo

0.2% Matla a Puno

Matla a ho qetela a Tensile

% Ho lelefatsa

ka 4D

%

Phokotso ea Sebaka

Brinell hardness HB HRC

ksi

MPa

ksi

MPa

Ft.-lbs

J

Tharollo e Eketsehile

47

324 117 806 70

72

-

- 28

Tharollo Annealed + Ho tsofetse

134

923

186

1282

33

51

87

118 35

 

Inconel 725 Maemo le Litlhaloso

Bara/Molamu Mohala
ASTM B 805, ASME Code Case 2217,SMC specification HA91, ASME Code Case 2217 ASTM B 805, ASME Code Case 2217

Inconel 725 Lihlahisoa tse fumanehang ka Metals ea Sekonic

Inconel 718 bar, inconel 625 bar

Inconel 725 bar & Rods

Li-bars tse chitja/Flat bars/Hex bars, Size From 8.0mm-320mm, E sebelisetsoa liboutu, li-fastner le likarolo tse ling

Letlapa le Letlapa

Inconel 725 lakane le poleiti

Bophara ho fihla ho 1500mm le bolelele ho fihla ho 6000mm, Botenya ho tloha 0.1mm ho isa 100mm.nickel-tube

Inconel 725 tube e se nang seam & pipe e cheselitsoeng

Boholo ba litekanyetso le boholo bo hlophisitsoeng bo ka hlahisoa ke rona ka mamello e nyaneNimonic 80A, iNCONEL 718, iNCONEL 625, incoloy 800

Inconel 725 Forging Ring

Forging Ring kapa gasket, boholo bo ka etsoa ka sebopeho se khanyang le mamello e nepahetsengHanger ea Tubing ea Oli

Inconel 725 Tubing Hanger

E ka hlahisoa ho latela litšoantšo tsa bareki kapa li-smaples tse nang le mamello e nepahetseng.Fasterner & Other Fitting

Inconel 725 Fasteners

Lisebelisoa tsa alloy 725 ka mefuta ea Bolts, screws, flanges le tse ling tse potlakileng, ho latela litlhaloso tsa bareki.

Inconel 725 Corrosion resistance

lron-nickel-chromium-molvbdenum-niobium based alloy, e hanyetsanang hantle le mefuta e mengata ea lik'hemik'hale tse senyang.Haholo e hanyetsanang le kutu, pitting, le khatello ea maikutlo ho phunyeha ha khatello ea kelello tikolohong e nang le carbon dioxide, chlorine le hydrogen sulfide.Outstanding corrosion resistance for the environments with acidic chemicals.Good corrosion resistance for brine and seawater.Ho hanyetsa kutu e ntle ha ho sebelisoa mocheso o phahameng.joalo ka tlhahiso ea oli le khase.moo motsoako o nang le khanyetso e ntle ho corrosion ea H2S.

Likopo tsa Inconel 725:

Li-bearings le likarolo tse ling tsa lisebelisoa tse hlokang khanyetso e phahameng ho lik'hemik'hale tse nang le acidic kapa tikoloho.Likarolo kapa sesebedisoa se sebedisoang maemong a mawatle

Inconel 725 Corrosion resistance: lron-nickel-chromium-molvbdenum-niobium based alloy, e hanyetsanang hantle le mefuta e mengata ea lik'hemik'hale tse senyang.Haholo e hanyetsanang le kutu, pitting, le khatello ea maikutlo tikolohong e nang le carbon dioxide, chlorine le hydrogen sulfide.e tsoileng matsoho ho hanyetsa ho corrosion bakeng sa tikoloho e nang le lik'hemik'hale tse nang le asiti.Ho hanyetsa kutu e ntle bakeng sa brine le metsi a leoatle.Ho hanyetsa kutu e ntle ha mocheso o phahameng o sebelisoa.joalo ka tlhahiso ea oli le khase.moo motsoako o nang le khanyetso e ntle ho H2scorrosion.
Likopo tsa Inconel 725: Bearings le likarolo tse ling tsa lisebelisoa tse hlokang khanyetso e phahameng ho lik'hemik'hale tse nang le acidic kapa tikoloho.Likarolo kapa sesebedisoa se sebedisoang maemong a mawatle


  • E fetileng:
  • E 'ngoe:

  • Ngola molaetsa wa hao mona mme o re romele wona