Mocheso o phahameng oa selemo, Mocheso o phahameng oa selemo

Lintlha tsa Sehlahisoa

Mocheso o phahameng oa selemo, Pad ea selemo ea mocheso o phahameng,
Mocheso o phahameng oa compression selemo, mocheso o phahameng shoa selemo, mocheso o phahameng oa disc selemo, mocheso o phahameng poleiti selemo, mocheso o phahameng selemo se khethehileng, mocheso o phahameng oa selemo pad, mocheso o phahameng otlolla selemo, mocheso o phahameng oa torsion spring, mocheso o phahameng valve selemo, selemo sa maqhubu a mocheso o phahameng,

Selemo

Mocheso o Phahameng oa Selemo :

Selemo ke karolo ea mochini e sebelisang elasticity ho sebetsa.Likarolo tse entsoeng ka thepa ea elastic li senyeha tlas'a ketso ea matla a ka ntle, 'me li khutlela sebopeho sa tsona sa pele ka mor'a ho tlosa matla a ka ntle.E boetse e sebelisoa e le "selemo".Ka kakaretso e entsoe ka tšepe ea selemo.Mefuta ea limela e rarahane ebile e fapane.

Khampani ea Rōna e Kopane le professonial Spring Factories Main Hlahisa le ho fana ka li-Spring tsa mocheso o phahameng


Ikopanye le Rona ho Ithuta Haholoanyane!

• Lisebelisoa tsa Selemo tsa Mocheso o Phahameng:

SUS304,SUS316, SUS631/17-7PH, SUS632/15-7Mo, 50CrVA, 30W4Cr2VA,

Inconel X-750, Tlhaloso: 718, Niconic90, Inoloy A286(SUH660)

• Mefuta ea Selemo:

→Compression Springs → Katoloso ea selemo

→Seruthwane sa Torsion →Seruthwana se Kobehang

♦ Leqhubu la Leqhubu ♦ Moqolo oa Selemo ♦ Leqhubu la Leqhubu

♦ Ring Spring ♦ Special-Shaped Spring, joalo-joalo

Mochini oa Selemo

 

Mefuta ea Lintho

Lebitso la Boitsebiso

Boholo ba mocheso oa Kopo°C

ts'epe e sa beng le mabali

SUS304/SUS316

200

SUS631/17-7PH

370

SUS632/15-7Mo

470

Alloy spring tšepe

50CrVA

300

30W4Cr2VA

500

Mocheso o phahameng oa nickel base alloy

Inoloy A286(GH2132)

600

Inconel X-750(GH4145)

600

Inconel 718 (GH4169)

690

Nimonic90(GH4090)

800 (γ<0.2)

GH4099

1000 (γ<0.1)

inconel 625 washer, Disc spring, gasket, lesale le kopane

♦♦♦ Disc Springs♦♦♦

Li sebelisoa haholo ho li-valve, li-flange, li-clutch, mariki, li-converter tsa torque, switch ea matla a phahameng a matla, ho tiisa bolt, tšehetso ea lipeipi, masimo a shockproof le a shockproof.ba hlahisitse ho latela DIN EN16983 (DIN2093).

Bophara ba ka ntle bo fapana ho tloha ho 6mm ho isa ho 1000mm.

Lisebelisoa li kenyelletsa tšepe ea alloy 51CrV4, carbon steel SK85, 1074;

• tšepe e sa hloekang ASTM301, 304, 316, 17-7PH, 17-4PH, 15-7Mo;

• Tšepe e sa keneleng mocheso H13, X30WCrV53, X22CrMoV12-1, X39CrMo17-1;

• Thepa e phahameng e hanyetsanang le mocheso oa tšepe e sa jeleng paate Inconel X750, Inconel X718, Nimonic 90, joalo-joalo.

♦♦♦ Wave Springs♦♦♦

Wave Spring ke tšepe e tšesaane e bōpehileng joaloka lesale e entsoeng ka maqhubu a mangata le liphula.Liliba tsa Wave li sebelisoa haholo ho li-motors, metjhini ea masela, lisebelisoa tsa hydraulic, likoloi le liindasteri tse ling.Setsi se seholo sa ho kenya le litlhaloso (boholo ba lebitso) ba kamore ea ho beleha li loketse.Kapa ka sekoting, sebaka sa ho kenya se senyenyane, 'me se na le mosebetsi o khethehileng oa ho fokotsa lerata le ho fokotsa ho sisinyeha.

Bophara ba ka ntle bo fapana ho tloha ho 6mm ho isa ho 1000mm.botenya bo tloha ho 0.4mm ho isa ho 5.0mm.

Leqhubu-selemo-01

Tšireletso ea mafome

  • Phosphating
  • Mechanical galvanizing
  • Nickel e pentiloe
  • Jiaomei

Ba na le litšobotsi tsa deformation e nyenyane le mojaro o moholo.E boetse e na le likarolo tse latelang.

  • Li-spring tsa disc li ka fumana litšobotsi tse fapaneng tsa mojaro ka mefuta e fapaneng ea inversion le ho fetana.
  • Ha ho bapisoa le liliba tse ling, liliba tsa disc li nka sebaka se senyenyane.
  • Ha lipampiri tse ngata li sebelisoa hammoho, phello ea damping ea eketseha.
  • Ha e sebelisoa ka mokhoa o utloahalang, e ke ke ea senyeha kapa ea robeha.
  • Bophelo bo bolelele ba mokhathala.
Lisebelisoa tsa Selemo Nako ea Mosebetsi Matla a tšepe Elastic Modulus KN//mm2 Khemistri%
°C N/mm2 RT°C 100°C 200°C 300°C 400°C 500°C 600°C C Si Mn P S Cr Ni

Ba bang
 
T8A SK85
-50 ho +100 1200-1800 206 202 0.80-0.09 ≤ 0.35 ≤ 0.50 ≤ 0.03 ≤ 0.03 ≤ 0.20 ≤ 0.25 Ke≤0.30
50CrV4 SUP10 -50 ho ea ho +200 1200-1800 206 202 196 0.47-0,55 ≤ 0.4 0.7 1.1 ≤ 0.025 0.025 0.9 1.2 ≤ 0.4 V:0.1 0.25 Mo≤ 0.1
C75 -50 ho +100 1200-1800 206 202 0.70-0,80 0.15-0,35 0.60 0.90 ≤ 0.025 0.025 ≤ 0.4 ≤ 0.4 Mo≤ 0.1
60Si2Mn SUP6 -50 ho ea ho +200 1200-1800 206 202 196 0.56-0.64 1.50-2.0 0.6 0.9 ≤ 0.035 0.035 ≤ 0.35 ≤ 0.35  
X 10CrNi 18-8 SUS301 -200 ho ea ho +200 1150-1500 190 186 180 0.05-0.15 ≤ 2.0 ≤ 2.0 ≤ 0.045 0.015 16.0 19.0 6.0 9.5 Mo≤ 0.08
X 5CrNi 18-10SUS304 -200 ho ea ho +200 1000-1500 185 179 171 ≤ 0.07 ≤ 1.0 ≤ 2.0 ≤ 0.045 0.015 17.0 19.5 6.0 9.5 N≤ 0.11
X 5CrNiMo 17-12-2 SUS316 -200 ho ea ho +200 1000-1500 180 176 171 ≤ 0.07 ≤ 1.0 ≤ 2.0 ≤ 0.045 0.015 16.5-18.5 10.0 13.0 Mo:2.0-2.5 N≤ 0.11
X 7CrNiAl 17-7 SUS631 -200 ho ea ho +300 1150-1700 195 190 180 171 ≤ 0.09 ≤ 0.7 ≤ 1.0 ≤ 0.04 0.015 16.0 18.0 6.5 7.8 Al:0.7-1.5
X5CrNiCuNb 16-4 SUS630 -200 ho ea ho +300 1150-1700 195 190 180 171 ≤ 0.07 ≤ 1.0 ≤ 1.0 ≤ 0.035 0.03 15.0 17.0 3.0 5.0  
X8CrNiMoAl 15-7-2 -200 ho ea ho +300 1150-1700 195 190 180 171 ≤ 0.09 ≤ 1.0 ≤ 1.0 ≤ 0.04 0.03 14.0 16.0 6.5 7.75 Mo: 2.0-3.0 Al:0.75-1.5
Tšepe
X39CrMo 17-1
-50 ho ea ho +400 1200-1400 215 212 205 200 190 0.33-0.45 ≤ 1.0 ≤ 1.5 ≤ 0.04 0.03 15.5 17.5 ≤ 1.0 Mo:0.7-1.3
X 22CrMoV 12-1 -50 ho ea ho +500 1200-1400 216 209 200 190 179 167 0.18-0.24 ≤ 0.5 0.4 0.9 ≤ 0.025 0.015 11 12.5 0.3-0.8 V:0.25-0.35 Mo:0.8-1.2
X30WCRV53 SKD4 -50 ho ea ho +500 ≥ 1470 216 209 200 190 179 167 0.25-0,35 0.15-0.30 0.20 0.40 ≤ 0.035 0.035 2.2 2.5 ≤ 0.35 V: 0.5-0.7 W: 4-5
X40CrMoV5-1 SKD61 -150 ho ea ho +600 1650-1990 206 200 196 189 186 158 0.32 0.40 0.8 1.20 0.20 0.50 ≤ 0.030 0.030 4.75 5.50   V:0.80-1.20 Mo:1.1-.75
Nickel
Inconel X750
-200 ho ea ho +600 ≥ 1170 214 207 198 190 179 170 158 ≤ 0.08 ≤ 0.50 ≤ 1.0 ≤ 0.02 0.015 14.0 17.0 ≥70 Co≤ 1.0 Ti 2.25-2.75 Fe 5.0-9.0
Inconel X718 -200 ho ea ho +600 ≥ 1240 199 195 190 185 179 174 167 0.02 0.08 ≤ 0.35 ≤ 0.35 ≤ 0.015 0.015 17.0 21.0 50.0 55.0 V≤ 1.0 Mo: 0.70-1.15
Nimoninike 90 -200 ho ea ho +700 ≥ 1100 220 216 208 202 193 187 178 ≤ 0.13 ≤ 1.0 ≤ 1.0 ≤ 0.03 0.015 18.0 21.0 Bal V15.0-21.0 Mo:2.0-3.0 Al≤ 0.2

♦ ♦ ♦ Lisebelisoa tsa Mocheso o Phahameng oa Selemo: ♦ ♦ ♦

♦ 304 tšepe e sa hloekang
304 tšepe e sa hloekang e holofatsoa ke ho sebetsa ho batang ho ntlafatsa thepa ea eona e otlolohileng.E ke ke ea thatafatsoa ke phekolo ea mocheso.E tla hlahisa magnetism nakong ea mosebetsi o batang.304 tšepe e sa jeleng paate e na le khanyetso e matla ea kutu le thepa e ntle ea 'mele.

 316 tšepe e sa hloekang

316 tšepe e sa hloekang e holofatsoa ke ho sebetsa ho batang ho ntlafatsa thepa ea eona ea rekere, 'me e ke ke ea thatafatsoa ke kalafo ea mocheso.E tla hlahisa magnetism nakong ea mosebetsi o batang.316 tšepe e sa hloekang e na le molybdenum, e nang le khanyetso e matla ea ho senya ho feta 304 tšepe e sa hloekang, 'me e khona ho hanela ho bola lits'ebetsong tsa lik'hemik'hale.

 17-7PH (GH631, 0Cr17Ni7Al)

17-7PH e hanyetsanang le kutu e tšoanang le 304 tšepe e sa hloekang, e ka fokotsoang ke phekolo ea mocheso le ho thatafala ha pula.E na le matla a phahameng le ho fana ka matla.Ts'ebetso ea mokhathala e betere ho feta tšepe e sa hloekang ea 304 le 65Mn carbon steel.E boetse e na le elasticity e ntle tlasa tikoloho ea ℃.

 15-7Mo (GH632, 0Cr15Ni7Mo2Al)

15-7MoHa e na le khanyetso e ts'oanang ea kutu ho 316 tšepe e sa hloekang.E ka fetisoa ke phekolo ea mocheso le ho thatafala ha pula.E na le matla a phahameng a ho tsitsa le ho fana, 'me ts'ebetso ea eona ea mokhathala e betere ho feta tšepe e sa hloekang ea 316 le 65Mn carbon steel.E boetse e na le elasticity e ntle tlasa tikoloho ea ℃.

 Inconel X-750 (GH4145)

Inconel X-750 ke "nickel-based precipitation hardening deformation superalloy".Haholo-holo e sebelisa r'phase joalo ka mohato o thatafatsang oa botsofali.Mocheso o khothalelitsoeng o ka tlase ho 540 ℃.Alloy e na le khanyetso e itseng ea kutu le khanyetso ea oxidation, 'me e na le ts'ebetso e itseng ea mocheso o tlase.

 Inconel 718 (GH4169)

Inconel 718 ke "nickel-based precipitation" e thatafatsang deformation superalloy.Mocheso o khothalletsoang ke -253–600℃.Alloy e na le matla a phahameng ka tlase ho 600 ° C, e na le ho hanyetsa mokhathala o motle, ho hanyetsa mahlaseli, ho hanyetsa oxidation le ho hanyetsa kutu, hammoho le ts'ebetso e ntle ea ts'ebetso le botsitso ba nako e telele ea sebopeho.

 A-286 (GH2132, SUH660)

Alloy A-286 ke tšepe e thehiloeng ho pula e thatafatsang deformation e nang le mocheso o phahameng oa mocheso.Mocheso o khothalletsoang oa ho sebetsa o ka tlase ho 540 ℃.Alloy e na le matla a phahameng a mocheso a phahameng le a tlase le botsitso ba nako e telele, ho hanyetsa kutu e ntle le ts'ebetso ea ho senyeha ha mocheso, 'me e na le polasetiki e ntle ea ho sebetsa le ts'ebetso e khotsofatsang ea welding.

1. Tsepamisa maikutlo ho mocheso o phahameng le pula e sa khaotseng
Mocheso o phahameng oa selemo o khethehile ka lipatlisiso le tlhahiso ea mocheso o phahameng oa selemo, ho bokella ho qetela e tla ba tsoelo-pele e latelang.
2. Tšebeletso e le 'ngoe ea lihlopha tse feletseng
Mocheso o phahameng oa tlhahiso ea feme ea selemo ea compression spring, otlolla selemo, disc spring, wave spring, leaf spring le heterosexual spring.
3. Inventory e lekaneng le tiiso ea ho fana ka thepa
Ho na le mefuta e fetang 20 le makholo a litlhaloso tsa lisebelisoa bakeng sa ts'ebeletso ea hau
4. Theknoloji ea docking e fumana habeli sephetho ka halofo ea boiteko
Boiphihlelo bo phahameng ba mocheso oa feme ea selemo bakeng sa moralo oa hau le lihlahisoa ho fana ka tharollo e utloahalang haholoanyane.
5. High mocheso teko tshebetso pepeneneng
Teko ea mokhathala o phahameng oa mocheso le liteko tsa thepa ea mocheso o phahameng, e le hore o ka utloisisa ts'ebeliso ea ho phomola.
6. Palo e sa lekanyetsoang, e loketseng le e ka khonehang
Palo e sa lekanyetsoang ea lifeme tsa selemo sa mocheso o phahameng ho fokotsa litšenyehelo le likotsi tsa hau tsa ho reka.


  • E fetileng:
  • E 'ngoe:

  • Ngola molaetsa wa hao mona mme o re romele wona