Letlapa la Titanium le Plate
• Lisebelisoa tsa Letlapa la Tittanium: Gr1, Gr2, Gr4, Gr5, Gr7, Gr9, Gr11, Gr12, Gr16, Gr23
• Libopeho: Leqephe la ho Forging, Leqephe la Cold Rolling, Leqephe le Chesang la Rolling
• Boemo:Botenya: 0.3 ~ 5mm, Bophara: 400 ~ 3000mm, Bolelele: ≤6000mm
• Maemo:Hot Forging & Hot Rolling, Cold Rolled, TharolloAnnealed
• Maemo:ASTM B265, AMS 4911, AMS 4902, ASTM F67, ASTM F136 joalo-joalo.
| Titanium Alloys Material Lebitso le Tloaelehileng | ||
| Gr1 | UNS R50250 | CP-Ti |
| Gr2 | UNS R50400 | CP-Ti |
| Gr4 | UNS R50700 | CP-Ti |
| Gr7 | UNS R52400 | Ti-0.20Pd |
| G9 | UNS R56320 | Ti-3AL-2.5V |
| G11 | UNS R52250 | Ti-0.15Pd |
| G12 | UNS R53400 | Ti-0.3Mo-0.8Ni |
| G16 | UNS R52402 | Ti-0.05Pd |
| G23 | UNS R56407 | Ti-6Al-4V ELI |
Letlapa la Titanium le Letlapa la Titanium:Re fana haholo ka lakane e hloekileng ea titanium ea limaraka tsa Gr1, Gr2, Gr4;Bakeng sa letlapa la alloy ea titanium, Re fana haholo ka Gr5, Gr7, Gr9, Gr11, Gr12, Gr16, Gr23 le limaraka tse ling,Li hlahisoa motheong oa poleiti ea titanium e nang le serame se eketsehileng;ts'ebetso ea tlhahiso ea letlapa la titanium e rarahane le ho feta.Taolo ea deformation e thata haholoanyane ts'ebetsong ea rolling.E ka khaoloa ka boholo bo fapaneng ho ea ka litlhoko tsa moreki, e khutsufatsa haholo nako ea ho pepa.
♦ Letlapa la Titanium Sebopeho sa lik'hemik'hale ♦
| Kereiti | Sebopeho sa lik'hemik'hale, peresente ea boima ba 'mele (%) | ||||||||||||
| C (≤) | O (≤) | N (≤) | H (≤) | Fe (≤) | Al | V | Pd | Ru | Ni | Mo | Lintlha Tse Ling Max.enngwe le enngwe | Lintlha Tse Ling Max.kakaretso | |
| Gr1 | 0.08 | 0.18 | 0.03 | 0.015 | 0.20 | - | - | - | - | - | - | 0.1 | 0.4 |
| Gr2 | 0.08 | 0.25 | 0.03 | 0.015 | 0.30 | - | - | - | - | - | - | 0.1 | 0.4 |
| Gr4 | 0.08 | 0.25 | 0.03 | 0.015 | 0.30 | - | - | - | - | - | - | 0.1 | 0.4 |
| Gr5 | 0.08 | 0.20 | 0.05 | 0.015 | 0.40 | 5.56.75 | 3.5 4.5 | - | - | - | - | 0.1 | 0.4 |
| Gr7 | 0.08 | 0.25 | 0.03 | 0.015 | 0.30 | - | - | 0.12 0.25 | - | 0.12 0.25 | - | 0.1 | 0.4 |
| Gr9 | 0.08 | 0.15 | 0.03 | 0.015 | 0.25 | 2.5 3.5 | 2.0 3.0 | - | - | - | - | 0.1 | 0.4 |
| Gr11 | 0.08 | 0.18 | 0.03 | 0.15 | 0.2 | - | - | 0.12 0.25 | - | - | - | 0.1 | 0.4 |
| Gr12 | 0.08 | 0.25 | 0.03 | 0.15 | 0.3 | - | - | - | - | 0.6 0.9 | 0.2 0.4 | 0.1 | 0.4 |
| Gr16 | 0.08 | 0.25 | 0.03 | 0.15 | 0.3 | - | - | 0.04 0.08 | - | - | - | 0.1 | 0.4 |
| Gr23 | 0.08 | 0.13 | 0.03 | 0.125 | 0.25 | 5.5 6.5 | 3.5 4.5 | - | - | - | - | 0.1 | 0.1 |
♦Letlapa la Titanum AlloyLintho tsa 'mele ♦
| Kereiti | Lintho tsa 'mele | |||||||
| Matla a tšepe Min | Ho hlahisa matlaMets (0.2%, e fokotsehile) | Elongation ka 4D Min (%) | Phokotso ea Sebaka Min (%) | Teko ea Bend(Radius of Mandrel) | ||||
| ksi | MPa | ksi | MPa | ＜1.8mm Botenya | 1.8-4.8mm ka botenya | |||
| Gr1 | 35 | 240 | 20 | 138 | 24 | 30 | 1.5T | 2.0T |
| Gr2 | 50 | 345 | 40 | 275 | 20 | 30 | 2.0T | 2.5T |
| Gr4 | 80 | 550 | 70 | 483 | 15 | 25 | 2.5T | 3.0T |
| Gr5 | 130 | 895 | 120 | 828 | 10 | 25 | 4.5T | 5.0T |
| Gr7 | 50 | 345 | 40 | 275 | 20 | 30 | 2.0T | 2.5T |
| Gr9 | 90 | 620 | 70 | 483 | 15 | 25 | 2.5T | 3.0T |
| Gr11 | 35 | 240 | 20 | 138 | 24 | 30 | 1.5T | 2.0T |
| Gr12 | 70 | 483 | 50 | 345 | 18 | 25 | 2.0T | 2.5T |
| Gr16 | 50 | 345 | 40 | 275 | 20 | 30 | 2.0T | 2.5T |
| Gr23 | 120 | 828 | 110 | 759 | 10 | 15 | 4.5T | 5.0T |
