Inkoloy800/ 800H/800HT Flange

Lintlha tsa Sehlahisoa

/incoloy800-800h800ht-flange-sehlahisoa/

Inkoloy 800/800H/800HT Flange

Lisebelisoa tsa Flange :Alloy Alloy 800/800H/800HT

Mefuta ea Flange:Ho ea ka litlhoko tsa bareki

Letsatsi la thomello :Matsatsi a 15-30

Nako ea Tefo :T/T, L/C, Paypal, Ect

Sekoinc Metals Main e hlahisa le ho fana ka li-alloys tse khethehileng Flanges, re amohela taelo ea mohlala

Alloy ea Incoloy 800ke lisebelisoa tse sebelisoang ho pharaletseng bakeng sa lisebelisoa tse lokelang ho ba le matla a phahameng le ho hanela oxidation, carburizing le liphello tse ling tse kotsi tsa ho pepesehela mocheso o phahameng (bakeng sa lisebelisoa tse phahameng tsa mocheso tse hlokang thepa e nepahetseng ea creep le fracture, sebelisa Incoloy Alloy 800H le 800HT).

Phapang e kholo lipakeng tsa li-alloys 800, 800H le 800HT ke thepa ea mochini.Liphapang li bakoa ke metsoako e thibetsoeng ea li-alloys 800H le 800HT le li-anneal tse phahameng tsa mocheso tse sebelisoang bakeng sa li-alloys tsena.Ka kakaretso, alloy 800 e na le thepa e phahameng ea mochine mocheso oa kamore le nakong ea nako e khutšoanyane ea mocheso o phahameng, athe li-alloys 800H le 800HT li na le matla a holimo le a ho phunyeha nakong ea mocheso o phahameng o atolositsoeng.

Inkoloy 800/800H/800HT Sebopeho sa Lik'hemik'hale
Alloy % Ni Cr Fe C Mn Si Cu S Al Ti Al+Ti
Ikolone 800 Min. 30 19 tekatekano - - - - - 0.15 0.15 0.3
Max. 35 23 0.10 1.5 1 0.75 0.015 0.60 0.60 1.2
Ikolone 800H Min. 30 19 tekatekano 0.05 - - - - 0.15 0.15 0.3
Max. 35 23 0.10 1.5 1 0.75 0.015 0.60 0.60 1.2
Ikoloy 800HT Min. 30 19 tekatekano 0.06 - - - - 0.25 0.25 0.85
Max. 35 23 0.10 1.5 1 0.75 0.015 0.60 0.60 1.2
Inkoloy 800/800H/800HT Thepa ea 'Mele
Botenya
(g/cm3)
Sebaka se qhibilihang
(℃)
Modulase oa elastic
(GPa)
Thermal conductivity
(λ/(W(m•℃))
Coefficient ea ho eketsa mocheso
(24 -100°C)(m/m °C)
Mocheso oa ho sebetsa
(°C)
7.94 1357-1385 196 1.28 14.2 -200 ~ +1,100
Inkoloy 800/800H/800HT Mechanical Properties

 

Alloy Sebopeho Boemo Matla a ho qetela a Tensile
ksi (MPa)
Matla a 0.2%
offsetksi (MPa)
Elongation
ka 2″kapa 4D, lekholong
800 Letlapa, Letlapa Annealed 85 (586) 40 (276) 43
800 Letlapa, Letlapa
Strip, Bar
Annealed 75 (520)* 30 (205)* 30*
800H Letlapa, Letlapa SHT 80 (552) 35 (241) 47
800H Letlapa, Letlapa
Strip, Bar
SHT 65 (450)* 25 (170)* 30*

   Mefuta ea Flange:

→ Flange ea poleiti ea welding (PL) → Slip-on Neck Flange (SO)


→ Welding molala flange (WN) → Integral flange (IF)


→ Socket welding flange (SW) → Moqomo oa likhoele (Th)


→ Lenonyeletso le nang le lenonyeletso (LJF) → Lenonyeletso le foufetseng (BL(li-)

 

Li-flange
incoloy 825 flange, monel flange, Alloy 926 flange

 Lisebelisoa tse ka sehloohong tsa Flange tseo re li Hlahisang

        Ts'epe e sa beng le mabali :ASTM A182

     Sehlopha sa F304 / F304L, F316/ F316L,F310, F309, F317L,F321,F904L,F347

       Duplex Stainless Steel: KereitiF44/ F45 / F51 /F53 / F55/ F61 / F60

  Nickel Alloys :  ASTM B472, ASTM B564, ASTM B160

               Monel 400Nickel 200,Setšoantšo sa 825,Incoly 926, Inconel 601, Tlhaloso: 718

            Hastelloy C276,Motsoako oa 31,Motsoako oa 20,Setšoantšo sa 625,Inconel 600

  Lisebelisoa tsa Titanium: Gr1/Gr2/Gr3/Gr4/GR5/Gr7/Gr9/Gr11/Gr12

♦ Maemo:

ANSI B16.5 Class150,300,600,900,1500(WN,SO,BL,TH,LJ,SW)

DIN2573,2572,2631,2576,2632,2633,2543,2634,2545(PL,SO,WN,BL,TH)

Inkoloy 800/800H/800HT Lihlahisoa tse Fumanehang ka Metals ea Sekonic

Inconel 718 bar, inconel 625 bar

Inkoloy 800/800H/800HT Bars & Rods

Libaka tse chitja / maballo a Flat / li-bar tsa Hex,Size Ho tloha 8.0mm-320mm, E sebelisetsoa liboutu, li-fastners le likarolo tse ling tse setseng

terata e tjheseletsang le terata ya selemo

Mohala oa Inkoloy 800/800H/800HT

Fana ka terata ea welding le terata ea selemo ka mokhoa oa khoele le bolelele bo sehiloeng.

/flange-sehlahisoa/

Inkoloy 800/800H/800HT Flange

Boholo ba litekanyetso le boholo bo hlophisitsoeng bo ka hlahisoa ke rona ka mamello e nepahetseng

Letlapa le Letlapa

Letlapa la Inkoloy800/800H/800HT le poleiti

Bophara ho fihla ho 1500mm le bolelele ho fihla ho 6000mm, Botenya ho tloha 0.1mm ho isa 100mm.

Inkoloy 800/800H/800HT e se nang seamless tube & phala e cheselitsoeng

Boholo ba litekanyetso le boholo bo hlophisitsoeng bo ka hlahisoa ke rona ka mamello e nyane

inconel strip, invar stirp, kovar stirp

Inkoloy 800/800H/800HT strip & khola

Boemo bo bonolo le boemo bo thata bo nang le bokaholimo bo khanyang ba AB, bophara ho fihla ho 1000mm

Fasterner & Other Fitting

Li-Incoloy 800/800H/800HT Fasteners

Lisebelisoa tsa alloy ka mefuta ea Bolts, screws, flanges le tse ling tse lebelo, ho latela litlhaloso tsa bareki.

Ke hobane'ng ha Inkoloy 800/800H/800HT?

• Ho hanyetsa kutu e ntle haholo mecheng ea litaba ea metsi ea mocheso o phahameng haholo oa 500℃.
• Ho hanyetsa ho bola ha khatello ea kelello hantle
• Mechine e metle
• Matla a phahameng a ho hahaba
• Ho hanyetsa hantle haholo ho oxidation
• Ho hanyetsa hantle likhase tse tukang
• Ho hanyetsa hantle haholo ho carburization
• Ho hanyetsa ho monya ha naetrojene hantle
• Botsitso bo botle ba sebopeho mochesong o phahameng
• Weldability e ntle

Incoloy 800/800H/800HT Sebaka sa kopo:

• Li-boilers tsa sebōpi sa ethylene• Ho phunyeha ha hydrocarbon

• Li-valve, li-fittings le likarolo tse ling tse pepesehetseng tlhaselo e senyang ho tloha 1100-1800° F.

• Libōpi tsa indasteri• Thepa ea ho futhumatsa mocheso

• Ts'ebetso ea lik'hemik'hale le petrochemical • Lisebelisoa tsa mocheso

• Super-heater le li-heaters tse nchafalitsoeng lifemeng tsa motlakase • Lijana tsa khatello

 


  • E fetileng:
  • E 'ngoe:

  • Ngola molaetsa wa hao mona mme o re romele wona