Nickel welding Wire ERNiCu-7 Monel 400/K500 welding terata
ErNicu-7 (Monel 400/K500) Mohala oa Welding
♦Lebitso la thepa ea ho cheselletsa: Mohala oa ho cheseletsa oa Nickel, ErNiCu-7, Monel 400/K500 Welding Wire
♦MOQ: 15kg
♦Foromo: MIG(15kgs/spool), TIG(5kgs/box)
♦Boima: bophara 0.01mm-8.0mm
♦Boholo bo tloaelehileng: 0.8MM / 1.0MM / 1.2MM / 1.6MM / 2.4MM / 3.2MM / 3.8MM / 4.0MM / 5.0MM
♦Maemo: E lumellana le Setifikeiti sa AWS A5.14 ASME SFA A5.14
ErNiCu-7 Thepa e thehiloeng ke Monel 400 le Monel K500, terata ena ea welding e sebelisoa haholo ho tjheseletsa MONEL400 alloy, MONELR404 alloy le MOENLK-500 alloy ka tungsten inert-gas welding, MGW le submerged arc welding, hape e ka sebelisoa bakeng sa ho tjheseletsa holim'a tšepe. ka MGW le ho tjheseletsa arc ka metsing.
Ho khothalletsoa ho sebelisa sekoaelo sa terata sa nickel Erni-1 bakeng sa maemo a khethehileng a ho cheselletsa khase.
| C | Al | Ni | Si | Mn | P | S | Fe | Cu | Ti | Tse ding |
| ≤0.15 | ≤1.25 | 62.0-69.0 | ≤1.25 | ≤4.0 | ≤0.02 | ≤0.015 | ≤2.5 | Bal | 1.5-3.0 | ≤0.50 |
| Diameter | Tshebetso | Volt | Amps | Tšireletso ea Khase | |
| In | mm | ||||
| 0.035 | 0.9 | GMAW | 26-29 | 150-190 | 75% Argon + 25% Helium |
| 0.045 | 1.2 | GMAW | 28-32 | 180-220 | 75% Argon + 25% Helium |
| 1/16 | 1.6 | GMAW | 29-33 | 200-250 | 75% Argon + 25% Helium |
| 0.035 | 0.9 | GTAW | 12-15 | 60-90 | 100% Argon |
| 0.045 | 1.2 | GTAW | 13-16 | 80-110 | 100% Argon |
| 1/16 | 1.6 | GTAW | 14-18 | 90-130 | 100% Argon |
| 3/32 | 2.4 | GTAW | 15-20 | 120-175 | 100% Argon |
| 1/8 | 3.2 | GTAW | 15-20 | 150-220 | 100% Argon |
| 3/32 | 2.4 | BONA | 28-30 | 275-350 | E loketseng flux may he usei |
| 1/8 | 3.2 | BONA | 29-32 | 350-450 | E loketseng flux may he usei |
| 5/32 | 4.0 | BONA | 30-33 | 400-550 | E loketseng flux may he usei |
| Boemo | Tensile Strength MPa (ksi) | Yield Strength MPa (ksi) | Elongation% |
| AWS reauirement | 480(70) Tloaelehileng | Ha ea hlalosoa | Ha ea hlalosoa |
| Liphetho tse tloaelehileng joalo ka ha li cheselitsoe | 530(77) | 360(53) | 34 |
Hobaneng ERNiCu-7?
•Ha ho Preheat e hlokahalang, mocheso o phahameng oa interpass 150 ℃ mme ha ho na PwHT e hlokahalang
•Lisebelisoa tse fapaneng tsa welding li kenyelletsa ho kopanya li-alloys ho Nickel 200 le li-alloys tsa koporo-nickel-
•E sebelisoa haholo lits'ebetsong tsa leoatle ka lebaka la ho hanana hantle le litlamorao tse senyang tsa metsi a leoatle le metsi a letsoai.
•E ka sebelisoa bakeng sa ho koahela MIG holim'a tšepe ka mor'a lera la pele le nang le nickel 208
